Lorem ipsum dolit amet consectetur.
Proin viverra maec donec

Range Of Product

1000 LPH TO 100000 LPH (1 M³ / PER HOUR TO 100 M³/ PER HOUR)

Automatic Bottling Equipment’s

Conway Utility Management and Projects Private Limited. incorporates the state of art technology in design engineering in the systems being manufactured. EVATS1000 fully automatic bottling machine specially designed and manufactured by Conway Utility Management and Projects Private Limited for bottled water bottling, has provisions in the machine for rinsing, bottled water filling, capping and sealing automatically. The entire process is fully computerized with PLC and Sensor control with one touch instrumentation system under technology transfer and technical collaborations from US Microcin Inc, California, U.S.A.
The whole equipment is sleek, and is capable of bottling various sizes of bottles ranging from 500 ml to 2 Its. The bottled water bottles are fed into the input feed conveyor of the EVAT1000 system. The bottles are first picked up using an automatic robot arm which tilts the bottle on top of a rinsing spray which rinses the bottles in three stages.
In the first stage the bottles are cleaned with ordinary water, and in the second with chlorinated water and finally by purified water. After the cleaning stage the bottles are put on the top of a built-in table where the third stage, filling takes place. The filling is executed by a highly sensitive sensor activating the flow of water to the accurate predetermined measured quantity. The special feature in the system is that no water flows to the system in the absence of bottles on the filling bay. In other words, in the absence of bottle in the bay, no water will flow through the system. After filling, bottles automatically move for the capping stage where the caps are released from the vibrator on to the bottles, and then the bottles are sealed automatically using a sealing arm. A number of germicidal lamp are provided to disinfect the water from air borne contamination, as also a final stage check membrane filter before the bottled water filling stage, to take care of the online contamination. In short, the EVATS 1000 is a unique bottling machine with its in-built high-tech features. The entire system is enclosed in a stainless steel/Glass outer casing. After the capping stage the bottles are automatically ejected out to the output conveyor to the feed area.

EVATS Polycarbonate Bottling Equipment’s:

EVATS comes in special models EVATS1000 PLC capable of packing polycarbonate bottles of five litre capacity to 24 litre capacity. EVATS1000 PLCincorporates all the special features of EVATS1000 that is fully automatic wash, fill and seal of polycarbonate bottles. The Evats 1000 PLC series consisting of 2 BPM to 24 BPM range has been specially designed and manufactured for 10 to 25 litters polycarbonate/Pet bottles. The whole equipment is sleek and is capable of bottling various sizes of bottles, ranging from 10-25 Lts. The mineral water bottles are fed into an automatic robot arm which tilts the bottle on top of high-pressure spray which washes the bottle in 5 stages. The Evats 1000 PLC series is designed to wash, scrub, fill and cap the bulk bottles. In the first stage the bottles are cleaned with filtered water. In the second stage the bottles with hot water detergent (temperature ranging from 55° C to 80° C).
The third stage bottle are cleaned with hot water to remove detergent traces (temperature ranging from 55° C to 80° C). In the fourth stage the bottle are cleaned with pre-ozone rinse water with a concentration of 0.4 to 1 ppm of ozone. The above 5 stages of washing are provided in models starting from 6 PLC to 24 PLC. Models ranging from 2 PLC to 6 PLC have 4 stage washing option of filtered water, hot water with detergent and ozonised water. All models of machines have special Nylo-Brussel scrubbers and angular sprays are provided to wash and scrub the exterior of the bottles. After the cleaning stage the bottles are put on the filling conveyor.
The filling is executed by a highly sensitive sensor activating a flow of water to the accurate predetermined measured quantity. The special feature in the system is that no water will flow in the system in the absence of bottles on the filling bay. After filling, bottles automatically move for the capping stage where the caps are released from the vibrator on the bottle and the bottles are sealed automatically using a sealing conveyor. A number of germicidal lamps are provided to disinfect the water from air borne contamination. The caps are also specially sanitized by ozone water jets. In short, the Evats-1000 -6PLC is a unique bottling machine with an in-built high-tech feature. The entire system is enclosed in a stainless steel/Glass outer casing. After the capping stage the bottles are automatically ejected out to the output conveyor to the feed area.

Why Choose Us

Comprehensive Facility Solutions and Exceptional Service

Conway Utility Management and Projects Private Limited offers top-tier solutions in Facility Management, Water Treatment, and Elevator Installation. Our team is dedicated to delivering operational excellence and environmental safety with every project.

Experienced Professionals

Our skilled experts bring years of experience to ensure safe, efficient, and compliant facilities for your business.

Affordable and Transparent Pricing

We provide competitive pricing without hidden fees, offering quality service that meets your budget.

Reliable & Prompt Service

Conway Utility Management and Projects Private Limited ensures timely responses and efficient service to keep your systems running smoothly with minimal disruption.

Other Service